Welding smoke purifier use matters needing attention

Welding smoke purifier use note (1) welding smoke purifier stand-alone dust removal unit, installed in the mechanical equipment nearby dust, and by the user in accordance with the air inlet on the dust removal unit size, can make the metal or plastic vacuum tube and dust hood, the dust removal equipment configuration. (2) dust removal unit before work must be strictly check the access door, ash and duct connection system is sealed door, in order to avoid leakage, reduce dust collection effect. (3) dust removal unit voltage for 380 v three-phase alternating current (ac), external wire connected to the power supply from the unit can begin to use, after the initial operation, should pay attention to whether the fan is turned. Electric cabinet cover (4) dust removal unit, shall not be arbitrarily open at work, if you need adjust time of soot, or need to check the circuit, should shut down or cut off power supply before work. (5) according to the size of the nature of the dust and let dust, should be regularly vibrating dust, usually 2 ~ 4 times per shift shaking, every time 30 ~ 45 s advisable, to ensure normal work unit. According to the actual needs, regularly to remove dust, the dust removal of dust collector, just stop work in fan and fly ash door, open the seal when pulled out the drawer. 6. In order to guarantee the welding smoke purifier in the best working state, the dust should be close to home, general with 1. It is advisable to 5 ~ 2 m, connection pipes as short as possible, and to minimize the elbow, lest increase the resistance loss. Dust hood is the key of unit in the groove fittings; Use the unit should be based on the shape of the machined part size and the nature of the dust, according to the communication, nearly, suitable, sealing, then design the principle of the dust hood, make ideal dust hood. All landowners should be regularly check the abrasion of filter bag, if found to have damaged shall promptly repair or replace the filter, at the same time should be according to actual circumstances, regular cleaning cloth, continuous use 3 ~ 4 months need to clean, clean or replace filter components to be simply the four set of screw loosening, and then, can be taken to install should pay attention to seal between the filter parts and fan parts ( Between the two parts with adhesive packing) , at the same time, pay attention to whether every bag of filter parts below with flat bag accordingly & throughout; , the loading is finished, should boot up to play several times, restore the original filtering effect to the filter. End of the unit should be diligent brush, regular cleaning, regular check, keep the unit clean and beautiful, to ensure normal operation of the unit.

Everyone who has a electrostatic air cleaner video wants it to look electrostatic air purifier project video. However, in order to achieve that, it normally involves investing in a hotel kitchen equipment video electrostatic precipitator gallery video. Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd. can offer you the best solution.

Our vision is to realize the tremendous potential of industrial exhaust air filtration video by providing government kitchen equipment video services that consistently meet our customers’ expectations.

need fuel for energy,while university kitchen equipment video do not.

While manufacturing modern range hood, we always pay attention to the technology and quality of the product.