Portable flue gas purification system was developed for the determination of operating point safety measures

Portable purifier determine the security mobile operating point smoke purifier dust collector device is designed on the basis of the types of dust source device and scale, facilities for massive dust source, dust collector device is very big also, almost all test points in high places. That must be considered when testing on high safety protection measures: a. Lifting equipment should have sufficient strength, test work platform, its width, intensity and the height of the safety rail shall comply with the safety requirements; b。 In test operation, to prevent the metal contact with electricity power cord, test equipment in order to avoid electric shock accidents; c。 The damage to prevent the harmful gas and dust; d。 The power of the test apparatus needed shape and the location of the socket, test instruments put location shall be safe and reliable, ensure operation safety accidents. Portable purifier dust sampling location choice in mobile smoke purifier concentration distribution in pipe even if there is no block is not entirely uniform, in a horizontal pipe large dust particles due to gravity sedimentation pipe lower concentration on the high side. Only in long enough dust concentration can be regarded as axisymmetric distribution in vertical pipeline. Sample gas velocity and gathering dust in the test, in order to obtain a representative sample, sampling location on the air flow in the smooth and straight pipe, as far as possible the elbow, valves and other variable diameter section downstream direction is greater than 6 times the diameter and the upstream direction is greater than 3 times the diameter of the place; At least should not be less than 1. 5 times the pipe diameter, but this should increase the test points. Moreover it is should be paid attention to in the cross section of the sample gas flow rate in more than 5 m/s. But for gaseous pollutants, because mixing is uniform, the sampling position is not affected by the above regulations limit, as long as pay attention to avoid the eddy zone. If the testing displacement at the same time, the sampling position is still needed for the dust of the position measurement.

RUIHE / DR. AIRE saves time and increases productivity because it's one of the most complete sources of business and contact information.

A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd. and our staff need to determine all the steps necessary to reach that goal and act on them.

Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd. really created a whole persona around modern range hood’s manufacturing and selling, and it's so innovative that people really respond to it.