Fine polishing the dust dust removal equipment performance test

Fine polishing dust dust removal device performance test grinding polishing dust dust removal system by the dust cap, pipe, dust collector, discharging device, blower, motor, silencer and exhaust smoke, etc. Due to construction, installation and equipment mechanic manufacture some difficult to consider many factors, in the process of the dust removal system of air volume, pressure, often do not agree with the design parameters, such as dust removal efficiency, this is dust removal equipment after the completion of the purpose of the test and adjust. Performance test of dust removal equipment is an important approach to the working characteristic of the scientific evaluation of the test purpose is mainly: a. Scientific evaluation of dust removal equipment performance and operation; b。 Check whether emissions pollution discharge dust concentration and satisfy the requirements of discharge standards; c。 Provide the basis for air quality management and operation management. According to the relevant regulations of the construction project, dust removal engineering should be built respectively commissioning stage of the cold test ( To clear the dust removal equipment technical characteristics and running index) And commissioning stage of thermal state test ( Aims to clear the technical performance of dust removal equipment and operating effects) 。 Dust removal equipment performance test is hard and meticulous work, the data is further processed to form the conclusion of the original information, through careful testing, as much as possible to reduce the test error, to improve the accuracy and credibility. Fine polishing dust dust removal device test project and necessary conditions of grinding polishing dust dust removal equipment test project is divided into general projects and special projects of different dust removal equipment. To make the necessary preparation before the test lay foundation for the scientific and feasible test. Through test project 1, dealing with gas flow, temperature, moisture content, pressure, dew point, density and composition. 2, dealing with the nature of the gas and dust. 3, dust removal equipment export and entrance dust concentration. 4, dust removal efficiency and through efficiency. 5, the pressure loss. 6, dust removal equipment of air tightness or air leakage rate. 7, dust removal equipment lose ash discharge mode and ash discharge capacity of the plant. 8, dust removal equipment body moisture, heating or cooling mode. 9, according to other needs, and blower, motor, air compressor capacity, efficiency, and a specific part of the content, etc.

Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd.'s products comply fully with all compatible producing regulations.

For details on oil mist video, see Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd. at DR. AIRE electrostatic precipitator.

electrostatic air cleaner video electrostatic air cleaning video may be adapted for use at any esp electrostatic precipitator video and is suitable for government kitchen equipment video.

Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd. manufactures cnc mist collector video with innovative facilities and professional operation.