Leading brand of electrostatic precipitator for commercial kitchen ventilation.
RUIHE designs the direct source capture of various airborne contaminants equipment - oil mist collector. It is an efficient and cost-effective way to remove nuisance or hazardous contaminants from the workplace to meet the specific standards of your unique plant.
When machining is operating, there are potential health hazards and risks. They associated with the oil and water based cutting fluids that are used as coolants and lubricants. Metalworking applications such as cutting, sawing, polishing, and grinding along with the use of these cutting fluids produces an oil mist that is sent airborne. Oil mist will cause great health risks resulting from long term exposure. Facilities also are at risk of physical hazards to the worker such as slippery floors. Oil mist collector ensures almost total collection of these pollutants, responding to local legislation. It is essential to build a safe working environment. Thus, we will help you to control containment of floating mist properly by oil mist collector.
Oil mist collector collects the contaminant airstream into the collector cell. It will drop out large mist or other particles. There are two sections with high and low voltage. In the high voltage section, stainless steel ionizer blade discharges positive airstream. In the low voltage section, the collector plate charges negtivated airstream to adsorbs smaller oil particles down to 0.01 microns. Oil mist will be collected and drained into a oil sump. The airstream then turns and passes up while the clean air is exhausted through the top of the unit. Oil, mist, smoke, and vapor removal efficiency to 95- 99.9%.
Depending on your plant requirements, modular designed oil mist collectors can be stacking vertically and horizontally to extend an unlimited air flow and higher removal efficiency! Let us know your standards that you would like your equipment built to, then we provide a correct oil mist collector that meets those standards at affordable price.
Start a plan today for solving your air contamination problems by contacting a RUIHE environmental oil mist collection expert via email or a call.
Oil mist collector filters can be used in cutting oil, diesel and synthetic cooling liquid as coolant in the process of oil mist and water mist.Return you a nature workshop.
Specification
DGRH-KC-2500 Industrial Oil Mist Collector Filter DGRH-KC-2500
NO. | Model | Air Flow (M³/H) | Cabinet Size L*W*H (MM) | Flange Size (Diameter mm) | Removal efficiency Rate | Wind Resistance (PA) | Power (Watt) |
1 | DGRH-KC-2500 | 2000-2500 | 1515*740*770 | ∅ 200 | 98% | <100 | 210 |
Features
Manufacturers Direct Marketing 3 inch sewerage water pump sewage pump
Non submersible pump sewage pump developed on the basis of the introduction of foreign advanced technology, now is the most advanced internal sewage systems. Features: Notable energy saving effect, no-clogging, anti-winding, strong particles passing ability, automatic installation, automatic prosecution, etc.
>>>Featrues of 3 inch sewerage water pump sewage pump
1. Chrome-plated pump rotor (more resistant to wear and corrode)
2. Thermal protector
3. High-end bearing and mechanical seal
4. Flange or Elbow for the water outlet
5. Motor Pressure: 220V/380V/ 415V/660V, 50HZ/60HZ, 3 PHASE
6. PH Value: 4-10
>>>Conditions of use
1.Max temperature does not exceed 50 °c, density of 1.0~1.3kg⁄m3
2.No more of 1/2 part of motor should be exposed
3.The pump must be used within the scope of head, ensure that motor is not overloaded
>>>Installation of 3 inch sewerage water pump sewage pump
>>> 3 inch sewerage water pump sewage pump application
High Quality
1. Exported to 58 Countries and Beijing Olympic use Feili Pump
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps,we are Alibaba International Trade Insurance Enterprise
5. Focus on middle and high-end market,we never seize market by using inferior material
6. With professional engineers research, we are the first enterprise to make high temperature submersible pump in Zhejiang Province.
Full Service
1. Quick response within 2-8hours, solve problems in 2 days.
2. Visit our factory anytime, 24-hours phone call is available, ship all samples within 2-10days.
ABOUT RUIHE (DR. AIRE)
Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd
We are specializing in the design, production and after-sales service of fume purification
equipment and exhaust gas treatment equipment.
ONE-STOP AIR CLEANING MANAGEMENT SOLUTIONS
(1) - Commercial cooking fume odour management
(2) - Industrial exhaust management
(3) - CNC machines oil mist management
CONTACT US
Tel:86 - 0769 - 23667212 Fax:86 - 0769 - 27285034
E-mail:sales04@RUIHEetech.com
Adderss:Bajiaowo Industrial Zone, Wanjing District, DongguanCity, Guangdong Province, China
Follow Us & Like Us